News
Door Frame Forming Machine
Door Frame Forming Machine
The door frame forming machine consists of a large industrial sized drum, which is known as the bed of the forming equipment. This equipment has a piston that moves in and out with the help of a cylinder that rotates. The other two components of this machinery are the cylinder rotor and the piston roller. Cylinder is generally available in different sizes depending upon the requirements of various industries. The cylinder is generally held at a height above the level of the bed of the forming equipment.
The three main parts of this door frame forming machine are: the power unit of the door frame forming machine (door frame hydraulic press); the power drum; and the piston roller. Cylinder is generally available in different sizes depending upon the requirements of various industries. The size of the cylinder determines the speed at which it rotates. The piston roller is known to be the most important part of this hydraulic forming equipment. The piston roller is responsible for drawing in the materials to the bed of the machine.
There are four types of door frame forming machines: horizontal punching, vertical punching, inclined punching and the direct punching machine. Horizontal punching is one of the oldest forms of door frame forming machine. This machine uses a hydraulic cylinder and a cylinder attached to a hand ram. In case of horizontal punching the workpiece is fed in vertically instead of horizontally.
Vertical punching is also known as the direct door frame forming machine. This type of door frame forming machine uses a hydraulic cylinder and a hand ram. In the case of this machine the workpiece can be fed in vertically or horizontally. The work is fed into the machine by a roller. In case of horizontal punching the metal door of the cylinder is moved up and down by a roller that is attached to a ram.
In case of vertical punching machine the work is fed into the machine horizontally. The machine is moved vertically using a hydraulic pump. A scoop assembly is used to remove the material from the pan. In case of a safety door frame roll forming machine the workpiece is fed into the machine by sliding on a chute. A hand ram makes the process easy.
There are many kinds of door frame forming machines that are available in the market today. These machines form door frames of different sizes, shapes and colors according to the requirement of different industries. It is vital to select the right punching machine for the correct job. If the machine can perform the required task properly then it will prove to be a worthwhile investment.
0users like this.
- Home
- New products
-
All Products
- Roof sheet roll forming machine
- Double/Three Layer Forming Machine
- Glazed Tile Roll Forming Machine
- C/Z/U Purlin Roll Forming Machine
- Floor Deck/Angle Jch Roll Forming Machine
- Light Steel Keel Roll Forming Machine
- Light Keel Villa House Roll Forming Machine
- Shutter Door and Door Frame Roll Forming Machine
- Roofing Ridge Cap Making Machine
- EPS Sandwich Panel Roll Forming Machine
- Cable Tray Roll Forming Machine
- Highway Guardrail roll forming machine
- Storage Shelves Roll Forming Machine
- Car Carriage Plate Roll Forming Machine
- 3d Wall Panel Roll Forming Machine
- Curving/Arch Roll Forming Machine
- Leveling shearing slitting machine
- Shearing & Bending machine
- Decoiler
- Industry Products
- Video
- Blog
- Contact
Your cart is currently empty.