hkyrollformingmachine

  • Double Layer Floor Deck Roll Forming Machine 
  • Double Layer Floor Deck Roll Forming Machine 
  • Double Layer Floor Deck Roll Forming Machine 

Double Layer Floor Deck Roll Forming Machine

stars, based on 0reviews
$1.00 piece
1items available
Contact Us
11
Product Description

Double Layer Floor Deck Roll Forming Machine.


Double Layer Floor Deck Roll Forming Machine is galvanized steel as a raw material, after rolling cold-formed technology, die forming, mainly used for the production of steel works with floor boards, rolled into the floor boards after its V-shaped cross-section into categories, U-type, a ladder or a combination of several shapes, mainly used to make permanent formwork composite slab or concrete slab.


Double layer roll forming machine combines the two models perfectly, with reasonable structure and beautiful appearance. The utility model has the advantages of saving floor space, simple operation, etc., and is especially suitable for customers with small site and on-site construction. And the double-layer cost is far lower than two single-layer machines, which is the user's recommended model.

technical parameter

1. Decoiler 

a. Manual feed with brake

2. Cutting device

a. Cutting mould: 1set

b. Material of blade: CR12 with heat treatment HRC60-62

c. Cutting off type: stop cutting, Automatic measuring length

d. Four guide post shear device,Cr12, Authentic material

3. Main Forming System

a. Feed width: Design according to customer size

b. Thickness of sheet: 0.3mm-0.8mm

c. Material of Roller: C45steel, modulation

d. Diameter of main shaft: 80mm

e. Power of main motor: 5.5kw

f. Roller Station: 11rows

g. chain: 1inch

h. Equipment base: 300H steel

i. Side plate thickness: 20mm

4. Electrical control System

a. PLC and HMI touch Screen  

b. Automatic length measurement

c. Automatic quantity measurement

d. Length measurement: Rotary Encoder

e. Power: 380V/3phase/50Hz(According to your request)

5. Hydraulic system

a. Oil pump station:1set

b. Motor power of Oil pump station:4kw

c. With cooler system

6. Run-out Table

a. Frame: steel groove welded

b. Length: 3m

c. Quantity: 1 pc

Products Show

Type:
Tile Forming Machine, professional manufacturer
Production Capacity:
8m/min
Certification:
CE,ISO
Applicable Industries:
Construction works 
Condition:
New
Tile Type:
Steel
Use:
roof and wall or any
Place of Origin:
Hebei, China
Brand Name:
HKY
Voltage:
32MPa
Dimension(L*W*H):
7.5m*1.5m*1.2m
Weight:
3.8T
Key Selling Points:
Automatic
After-sales Service Provided:
Engineers available to service machinery overseas, Online support
Diameter of Principal Axis:
70mm
Thickness:
0.3-1mm
Customize:
as your demand
Warranty:
12 months
Recent Reviews
+