Square Pipe Roll Forming Machine

Square Pipe Roll Forming Machine

Using square pipe roll forming machine, you can produce different types of architectural parts and HVAC components.square pipe roll forming machine This machinery is cheap and easy to operate. This equipment can improve the physical properties of channel steel. It is widely used in green environmental protection.

You can easily adjust the output of the machine.square pipe roll forming machine You can also change the width and height of the product. The control box includes all the switches and pilot lamps. There is also a touch screen. The encoder records the signal feedback and the total length of the coil can be calculated from the control panel. During operation, you can check the bearings for abnormal sounds.

The gear box should be lubricated with fluid gear oil. You can also add high speed lubricating grease. You should also check the bearings regularly. If you notice abnormal sounds, you should stop the machine immediately. You can also clean the vertical roller device and welding seam extrusion device. In addition, you should dismantle the machine and clean it regularly.

The main parts of the square tube forming machine are the frame, the hydraulic system, the horizontal roller, the decoiler, and the forming roller. The frame is made of steel. The rollers are fabricated by CNC precision machine. Each roller will be checked for the tolerance. They should be greased and cleaned regularly. The lubricating grease should be changed every two days.

The hydraulic system is complete with a punching hole device, a tachometer, and a control box. The control box has a touch screen, all the push buttons, and the emergency stop switch. There are also one set of pre-cutting blades in the hydraulic system.

The hydraulic system is controlled by a computer. It keeps the temperature down and allows automatic production. The forming roller is assembled with multipoint preflex design to provide low roller loss and high quality. During the process, the forming roller can be adjusted by the spacer. The upper and lower adjustment nuts can be adjusted at the same time. The shaft of the horizontal roller should be raised according to the shape variable. The bearings should be checked and oiled regularly.

The bending machine can be adjusted for the height and width of the product. The angle between the male and female rolls can be changed for the flat features. The shape of the tube can be achieved by keeping the R Angle. This is useful for improving the R of the inner corner forming. It is recommended to use the rotary draw bending method for tight radius bends. If you use the tube mill, the tube bending can be done to the length that you want.

The tube mill can form the product round. The sizing section of the machine is equipped with a double turks-head. The finishing part is equipped with a specialty reshaping stand near the exit. The sizing section is also equipped with a breakdown section.

The tube mill is best suited for the production of rectangles and round shapes. The pass count is determined by the material's yield strength, its minimum to maximum range of material thickness, and the complexity of the shape that needs to be formed. The pass count is also determined by the experience of the roll tooling designer. The pass count is often based on the alternating driven forming pass and idle side pass patterns. It can also be based on the springback from the previous forming pass. It is more common to use the idle side passes in the welded roll forming systems.

Tags:light steel villa roll forming machine | ceiling stud and track roll forming machine | ceiling stud roll forming machine