What should be paid attention to about the use of roll forming machine?

What should be paid attention to about the use of roll forming machine?

  • Tuesday, 16 June 2020
  • 0
  • 2357
  • 0

1. Roll forming machine, before use, check whether all the installed bolts and nuts are connected and there is enough hydraulic oil in the hydraulic pump station, whether the electric box line is connected to all parts of the machine, and after the electric power starts trial operation. First, carefully observe the empty car running, whether there is vibration, noise, oil hydraulic pump, whether the moving parts are coordinated, before the equipment is used, adjust the mold to the ceiling, everything is normal, start the operation.


2. Roll forming machine, In the process of operation, it is more important to pay attention to safety. The equipment has high power and automatic control, so it is necessary to pay attention to safety during operation.


3. Roll forming machine, Last but not least, the work of color steel equipment must be checked, cut off the power supply and avoid the electronic components caused by short circuit. For example, the electric machinery and electrical box are damaged, and the power supply is cut off in thunderstorm weather to avoid unnecessary damage to lightning water, etc.


One of the basic principles of the roll forming machine process of roll forming machine is that the strip is bent in a straight line along the longitudinal direction, however, the pressure generated in the bending process is combined with the residual stress in the strip. Often, the strip deviates from the cold bending equipment to describe the deviation degree after the strip comes out from the last forming roll. The more commonly used words are: warping - bending in the vertical direction, side bending - bending in the horizontal direction, twisting - in a spiral shape.

0users like this.

Leave a Reply